Best Tankless Electric Water Heaters

Under Sink Tankless Electric Water Heater

If you need hot water for a single appliance, then what you will read in this article will be of great value to you. A, so called, point of use electric tankless water heater is perfect for a single appliance, like a sink. It is called point of use because it is very small and can be installed very close to the target. You can also buy top quality water heaters in India here.

So if the electric tankless water heater is installed very close to the target; that means the hot water must not travel too much to reach its destination. This is a good thing, because the hot water won’t cool off while traveling through the pipes. Unlike the tank based water heaters, this type of water heaters heat water only when you need it, so no standby energy is needed.

The point of use electric tankless water heaters are very compact, they are designed to save a lot of space and to be installed in almost any spot. They usually can be mounted on the wall, but the most common point of use tankless water heaters are used for sinks, so the best spot to install them is under the sink.

The point of use tankless heater also saves you a lot of money on bills, because they use electricity only when hot water is needed. The small point of use heaters are also very easy to install. You don’t need a pro to do it, you can install it yourself. All you have to do is connect the hot water pipe, the cold water pipe and some wires and you’re done.

The flow rate that the small tankless heater can provide is usually as high as 2 gallons per minute. That is more than enough for one sink. Usually 2 gallons per minute are never used, because such a flow rate isn’t needed. The users prefer to keep it lower so the temperature of the water can be higher.

The point of use tankless water heater can be used almost anywhere for a single appliance. It can be used for restrooms that are in: office buildings, gas stations, stores, schools, malls, hotels, motels, warehouses, restaurants and so on. This is if the tankless heater is for commercial purposes. It can also be used for residential purposes: bathroom sinks, kitchen sinks, laundry areas, small cabins and so on. So, if you need a tankless water heater that is designed for one appliance, the best choice is the point of use tankless water heater

The Noritz Tankless Water Heater

Noritz has been manufacturing gas based water heaters since 1951. Noritz has always looked out for the environment and always tried to conserve energy and space. These were the main things that have helped Noritz expand faster. In 2001, more and more Americans wanted environmental friendly and lower cost products. That’s when Noritz Japan established Noritz America. Noritz America Corporation has a lot of skilled employees which help the company develop much better products in the future, making the customers’ life more enjoyable and healthier.

Noritz offers very good quality, because all the parts are made by themselves. Not many companies do that. The heat exchanger is made from raw copper. All of this makes Noritz a high quality manufacturer, which is also obtained by using Just-In-Time(JIT) production system.

Noritz is the only tankless water heater company that uses JIT. It was invented by Toyota and assures a very efficient quality control. This helps Noritz a lot because this way they can ship an order that was made in the morning during the afternoon.

The Noritz company also uses high end technology. They were the first company to be accredited by ASME. Noritz also has one of the best flow rates in water heaters. You can choose between various models from Noritz, they have a large line of products. They also offer boilers for heating applications.

The copper used to make the heat exchanger is 25% thicker than the usual one. Another innovation brought by Noritz is the dual flame burners which stabilize the temperature more effectively and maintains low emissions.

An impressing thing that you can achieve with Noritz heaters is the performance you get by using multi system heaters. The hot water can reach 316.8 gallons per minute. To reach that performance you need to use 24 units that work at 9.1 million btus.

Like other companies, Noritz also offers indoor and outdoor heaters that are based on electricity or gas. The products are categorized in residential and commercial. The tankless water heaters from Noritz use a flexible installation system, so they can be installed almost anywhere. It doesn’t matter if it is inside or outside. Noritz also provides you with a chart that helps you estimate the hot water usage and choose the right model for you.

In conclusion, Noritz is one of the best tankless water heating products manufacturer. They provide all types of products and everything you need. So if you feel this is the right brand for you then you shouldn’t have any doubts.

Bosch Powerstar Electric Water Heaters

Bosch Powerstar is a good line of products that provides variety. They are designed for anyone who needs hot water. They can be used for every small home, although they are not designed to provide a shower with hot water. The products I will talk about in this article are: AE 7.2, AE 12, AE 3.4, AE 9.5.

I’m going to start with the AE 7.2 model because it is my favourite model and it is the most common one. The AE 7.2 is a small tankless water heater that uses electricity. It is pretty cheap and comes in handy for a small home. The price for a AE 7.2 is somewhere around $218. It is perfect for a home that has one bathroom and one kitchen. The efficiency of a AE 7.2 is 99%.

The maximum temperature rise the hot water can reach is 135 degrees Fahrenheit and the lowest flow rate is 0.5 gallons per minute. The heating elements as well as the heating exchanger are made of solid copper. Everything is housed in tough plastic.

The bad side of this product is that it can’t supply a shower and they can’t use preheated water, but the good part is it is very easy to install and it fits almost anywhere. The warranty is 5 years for the heat exchanger and 1 year for all parts.

The AE 12 has almost the same specifications as the AE 7.2 with a few exceptions. The lowest flow rate is 0.75 gallons per minute and the highest is 1.5 gallons per minute. The installation must be done horizontally. As for the performance, it provides 1.5 gallons per minute at a 55 degrees Fahrenheit rise, 1 gallon per minute at a 65 degrees Fahrenheit rise and 0.7 gallons per minute a 70 degree Fahrenheit rise. The price for this product is somewhere around 250$.

The only models left to talk about are AE 3.4 and AE 9.5. As you have seen, the AE 7.2 is considered as the average one. The AE 12 has the highest power and AE 3.4 and 9.5 are somewhere between. They have the same qualities as the 7.2 except for a few things. The AE 3.4 amperage is 29 and the maximum water flow is 1 gallon per minute. The AE 9.5 has an amperage of 40 and the highest flow rate is 1.5 gallons per minute. They both cost somewhere around $218.

If you need hot water for a small home just for the bathroom kitchen and maybe a sink or two, the perfect choice is the AE Powerstar model. It is very cheap and very easy to install. With it, you can have hot water anytime at a low price!

Leave a Reply

Your email address will not be published. Required fields are marked *